How to Manually Turn on an Irritrol Sprinkler System: A Guide by Watermaster Irrigation, Your Lubbock Irrigation Specialist

Irritrol sprinkler system

Maintaining a lush and vibrant lawn requires a properly functioning irrigation system. Among the leading brands in the irrigation industry, Irritrol is renowned for its reliable and efficient sprinkler systems. 

As your trusted Lubbock irrigation specialist, Watermaster Irrigation understands that knowing how to turn on your Irritrol sprinkler system manually can be invaluable in certain situations. In this blog post, we will guide you through the step-by-step process, ensuring you can keep your lawn hydrated and healthy all season.

Step 1: Locate the Irritrol Controller

The first step in manually turning on your Irritrol sprinkler system is to locate the Irritrol controller. The controller is typically installed in a convenient and easily accessible location, such as a garage, basement, or utility room. Look for a small box mounted on the wall, often accompanied by a door or lid.

Step 2: Remove the Controller Cover

Once you’ve located the Irritrol controller, gently remove the cover or open the door to access the control panel. Be cautious while handling the cover to prevent damage to the controller or its components.

Step 3: Identify the Manual Operation Features

Inside the Irritrol controller, you will find various buttons, switches, and dials. Look for the manual operation features, which are typically labeled and prominently displayed. Commonly, you will find buttons or switches labeled “Manual,” “Run,” or “Test.”

Step 4: Activate Manual Mode:

Depending on the model of your Irritrol controller, the process of activating manual mode may vary slightly. However, the general procedure involves pressing the appropriate manual operation button or switch. Once activated, the controller will bypass the regular programming and allow you to control the sprinkler system manually.

Step 5: Select the Zone to Water

After activating the manual mode, select the specific zone or zones you want to water. Irritrol controllers often have numbered buttons or a dial to designate the zones. Refer to your system’s zone layout or mapping to determine the appropriate zone(s) to activate.

Step 6: Adjust Watering Duration:

Once you’ve selected the desired zone, you may have the option to adjust the watering duration. Some Irritrol controllers offer buttons or dials specifically for adjusting the watering time, allowing you to fine-tune the duration according to your lawn’s needs.

Step 7: Start Watering:

With the zones and watering duration set, it’s time to start watering. Press the “Start” or “Run” button on your Irritrol controller to initiate the watering process. You should hear the distinct sound of the solenoid valves opening, indicating the water flowing through the sprinkler heads.

Step 8: Monitor and Adjust:

While the system is running, monitor the sprinklers to ensure they function correctly and cover the intended areas. Make any necessary adjustments to the sprinkler heads or watering duration if you notice any dry spots or excessive water runoff.

Find Out How Watermaster Irrigation Can Help

Knowing how to turn on your Irritrol sprinkler system manually can prove immensely beneficial, especially during maintenance, testing, or when programming glitches occur. By following the step-by-step guide provided by Watermaster Irrigation, your Lubbock irrigation specialist, you can confidently activate and control your Irritrol system, ensuring your lawn receives the right amount of water when it needs it most. Remember, if you encounter difficulties or require professional assistance, our team is always ready to help you maintain a healthy and beautiful landscape.

Leave a Reply

Your email address will not be published. Required fields are marked*

Audio Go Pixel